AND ITS HERE! The boards finally came from the fab and they surprisingly good for such a cheap price (~240HKD) They even sent an extra 2 for a total of 12 each 😀 )though the smaller print on the silkscreen is still missing that special touch but otherwise it looks really good.
Here’s a photo of the boards, some of the chips and the Nixie Tubes (only 6 T.T got to buy 2 more)
The left board is the Nixie Tube board where the HV5622 and the Nixies will sit and the right one is the Main board where the power supply and control circuitry go. The chips from top to bottom are HV5622, DS3232 and the MAX1771 (Not gonna use it in this design but it used to be on there!) I got those 3 chips for free as samples from Microchip and Maxim so big thanks to them! The tubes were from my sister so big thanks to her also!
Though of course I have added my own twist to it and have some added features.
The main differences are:
5 switches possible! Could be less if you tweak the software
Buzzer/Speaker output 😀 hurray for alarms in the morning
Light Sensor to detect night time to conserve power and extend Nixie tube life (could probably act as a basic motion sensor with some software magic)
Should be able to fit 2x9V batteries instead of one so more portable cosplay time 😀
Should be able to fit 2xAA RTC backup battery so it keeps track of time accurately for theoretically over a year.
Interrupt based instead of Polling to conserve even more battery
Uses the larger but cheaper and more available version of the HV5622
Integrated switching power supply instead of a bought module
Uses an AVR instead of a PIC (I chose it because it can be reprogrammed by AVR tools and a PICKIT2 if you happen to have any of those)
Mostly SMD parts to make look all good when your showing off the innards XD
Miku silhouette included
Can only use the DS3232 RTC and not the DS1307
Other than that it should be largely the same 🙂
Here are some not so 3D 3D models :3
Main Board 3D Model:
(I didn’t know what to add in the battery area so i just stuck a Miku silhouette in there :3 )
Nixie Tube Board 3D Model:
Just to let you know I don’t even know if I can do this, so don’t get your hopes too high lol I just wanted to share this with you all~~~~~ I got most of the parts but I’m currently waiting for the PCBs to come from the fab so after that I’ll begin assembling it 😀 I hope in time for the summer anicon so that I can show it off :p oh and if you want you could give out some ideas that I can implement in software (not in hardware cuz thats already set in stone)
NOTE: The divergence meter is a fictional device from the anime Steins;Gate, it’s used to calculate the Attractor Field of a universe/timeline so that they can be differentiated. For more information go to http://steins-gate.wikia.com/wiki/Divergence_Meter